D–Link DSL G604T

back to main

Checking for the firmware version on Dlink DSLG604T


  1. Open your browser and enter 10.1.1.1 in your address bar
  2. Enter the username and password of your router. By default it will be Username: “admin” and Password: “admin” or if you have changed this, please enter the new username and password
  3. It is recommend that your router holds the latest firmware. Please check to see if you have the latest firmware. The manufacturer can help with this if you need to upgrade
  4. To check the firmware version, click on ‘Status’ at the top then ‘Device Info’ on the left. The firmware version should appear here. Please check with the manufacturer or their site to see if you have the latest firmware and perform an upgrade if you don’t


    Please Note: TPG will endeavour to always have the most current set up instructions that reflects the latest firmware. Please always refer to the manufacturers website for the most current firmwareupdates

Configuration of IPTV on DSLG604T


  1. Open your browser and enter 10.1.1.1 in your address bar
  2. Enter the username and password of your router. By default it will be Username: “admin” and Password: “admin” or if you have changed this, please enter the new username and password
  3. Click on ‘Home’ at the top then ‘WAN’ on the left side menu.


    For the PVC field select ‘Pvc1’

    In The VPI field type “0”

    In the VCI field type “35”

    For the Virtual Circuit’ select ‘Enabled’

    For the WAN Settings field select ‘Bridged Mode’

    For Connection Type select ‘1483 Bridged IP LLC’

    For the Service Category select ‘UBR’

    Click on Apply

  4. Click on ‘Tools’ at the top then ‘Miscellaneous’ on the left menu



    In the IGMP Proxy drop down menu select ‘PVC1’

    Select ‘Enabled’ on the right of this

    Click on Apply

  5. Click ‘Tools’ on the top then ‘System’ on the left menu. Click ‘Save and Reboot’ to reboot the router



  6. When the router reboots and connects to the internet (authenticates), it will take a further 1 minute for the IPTV settings in your router to register and work

To edit/check the settings of IPTV on DSLG604T


  1. Open your browser and enter 10.1.1.1 in your address bar
  2. Enter the username and password of your router. By default it will be Username: “admin” and Password: “admin” or if you have changed this, please enter the new username and password
  3. Click on ‘Home’ at the top then ‘WAN’ on the left side menu



    Ensure in the PVC field ‘Pvc1’ is selected

    The VPI field should be “0”

    The VCI field should be “35”

    Check Virtual Circuit is ‘Enabled’

    Check ‘Bridged Mode’ is selected for the WAN Settings field

    Check ‘1483 Bridged IP LLC’ is selected for Connection Type

    Check ‘UBR’ is selected for the Service Category field

    Click on Apply if you have made any changes

  4. Click on ‘Tools’ at the top then ‘Miscellaneous’ on the left menu In the IGMP Proxy drop down menu ensure ‘PVC1’ is selected. Check that ‘Enabled’ is selected on the right of this. Click on Apply if you have made any changes



  5. Click ‘Tools’ on the top then ‘System’ on the left menu Click ‘Save and Reboot’ to reboot the router



  6. When the router reboots and connects to the Internet (authenticates), it will take a further 1 minute for the IPTV settings in your router to register and work