TPG Support

Setup for TPG Fibre To The Building (FTTB)

There are 2 different FTTB modem wiring setups depending on whether you received a Network Termination Unit (NTU) from TPG.


If you did not receive an NTU


1. Connect the Power port on the back of your modem to your power socket.
2. Connect the DSL port on the back of your modem to your telephone wall socket.
3. Connect the Phone1 port on the back of your modem to your telephone handset.
4. Connect any of the 4 LAN ports on the back of your modem to your PC.


If you received an NTU


1. Connect the Uplink port on the supplied NTU to your telephone wall socket.
2. Connect the Power port on the supplied NTU to your power socket using the supplied power adapter and ensure the NTU is turned on.
3. Connect the Power port on the back of your modem to your power socket.
4. Connect the Modem port on the supplied NTU to the DSL port on the back of your modem.
5. Connect your telephone handset to the Phone1 port on the back of your modem.
6. Connect your PC to any of the 4 LAN ports on the back of your modem.