TPG Support

Setup For NBN FTTP

FTTP_Diagram
  • 1. Connect the power cable from your modem's Power port to your power outlet.
  • 2. Connect the supplied yellow Ethernet cable from your modem's blue WAN port to the UNI-D port on your NBN Connection Box.

    Note: TPG will send you an email with the UNI-D port number when your NBN service is active.

  • 3. To plug in devices via Ethernet cable, connect the Ethernet cables to any of the four yellow LAN ports on your modem.
  • 4. If a Phone Service is included in your plan and you would like to use it, plug your handset into the UNI-V port on your NBN Connection Box.